09 December 2009

Vertical slicers

Staylogs / half round slicers

Veneer lathes

Dryers

Presses

Splicers

Clippers

Guillotines

Glue application

Split saws

Edgebanding machines

Knife grinders

Flitch planers

Hogs

Stackers

Sawmills

Boilers

Vertical slicers:

a) 165" (4.2m) long
b) 185" (4.7m) long
c) 213" (5.4m) long

As-is or remanufactured

All remanufactured come with 12 months warranty and with new:

-Servo thickness and carriage controls,
-Variable speed AC main drives,
-Roundup, thickness change on the fly, knife service features
-Hydraulics,
-Heating systems,
-Electrical and controls,
-Outfeed conveyors.
-Hydraulic knife clamps,
-Flitch pushers and flitch finders.

Staylogs / half round slicers:

a) 125" (3.2m) long
b) 150" (3.8m) long

As-is or remanufactured
All remanufactured come with 12 months warranty and with new:

-Servo thickness and carriage controls,
-Variable speed AC main drives,
-Roundup, thickness change on the fly, knife service features
-Hydraulics,
-Heating systems,
-Electrical and controls,
-Outfeed conveyors.

Optional hydraulic knife clamps.

Vener lathes:

As-is or remanufactured.

a) 66", Coe 263 hydraulic single spindles, AB controls, 125 HP DC drive.

b) 66", Coe 263 dual spindles, AB controls, 125HP DC drive.

c) 55", Coe 263, rebuilt in 2004 and run one year part time, servo carriage, all new electrical, all new hydraulic and controls, perfect condition.

Dryers:

a) 6 section, press, Babcock, 1995, 4.2m wide, steam heated, vacuum feeder, cooling.

b) 6 section, press, Babcock, 1992, 6.2m wide, steam heated, vacuum feeder, cooling. : 1 2 3 4

c) 5 section, press, Babcock, 1995, 4.2m wide, steam, poor screens.: 1 2 3 4 5 6 7 8 9 10 11

d) 15 section, press, Babcock, 1995, 6m, steam heated, cooling, vacuum feeder for rotary veneer.

Presses:

a) OTT (Wemhoener) veneer flattening press, solid steel bored platens 1.4m x 5.2m, steam heated, cold water cooling, infeed and outfeed conveyors.

Splicers:

a) Ruckle FZS 34, good running condition, 1972.

b) Ruckle FZS 28 with trim and tape, good condition, can see it running, 1980.

Clippers:

a) 4m sine wave RFR, remanufactured.

b) 4.6m Cremona sine wave, back table, sold as is, excellent condition.

c) 36” Capital end clipper, DEMAG brake motor upgrade, extra knife.

Guillotines:

a) Ompec TRO/10 CE 2800mm (110"), 1998, safety curtain, extended digital back fence

b) Ruckle AFN 37H, 1985, with glue applicator

c) Monguzzi AFV 62/2300, 4 knife, 1998

d) Casati 3.2m double knife

e) Ruckle AFMR 4.4m, 1986, Excellent condition, can see running

Glue application:

a) Kuper KLM glue applicator for veneer bundles, complete with conveyors and extra rolls, very good condition.

Split saws:

a) 165 " split saw.

Edgebanding machines:

a) Kuhlmeyer Sander, FSA 24, 3 head, 450mm capacity, double winder and unwinder, light table, 1986.

b) Barbaran Fleece Laminator,  RCH-400/3, 400mm capacity, Excellent condition, 1993.

Knife grinders:

a) 128", Goekel G40 ELT, magnetic bed.

b) 142", Toyo, magnetic bed.

Flitch planers:

a) Capital, top and bottom planer, 1990. : 1

Hogs:

a) Capital, veneer hog, 36".

b) Stedham hammermill, 100 Hp with 50 Hp fan.

Stackers:

a) 8 bin dry, Babcock, 1995.

b) 4 bin green, Mienen, 8x4’.

Sawmills:

a) Corley sawmill, top saw, carriage new in 2003, log turner, decks. : 1 2 3 4 5 6

Wood fired boiler :

a) Industrial boiler, 1990, model 400-150, wood fired, 400 HP, 150 psi, water softener, condensate tank. : 1 2 3

b) Hurst boiler, 300 HP, wood fired, used 2 years.

back to top