Butt Flare Reducer vs. Rosserhead Debarker
I recently came across a magazine ad in which a manufacturer promoted their rosserhead debarker as a tool to reduce butt flares. Using rosserheads to reduce flares is not a…
Veneer Chip Waste Handling line from Veneer Services.
Material Handling: Waste Veneer
Veneer waste can be difficult to transfer, chip, and reclaim due to its characteristics. Fortunately, we offer solutions that make it easier to process. Waste Conveyor Difficulty processing waste veneer…
Courtesy Alberta Innovates Bio Solutions, Creative Commons 2.0 Generic license: https://goo.gl/H9FUa8.
The Next Veneer Boom? Structural Composite Lumber
Once the go-to product for reducing the cost of furniture and panels, veneer has, for years, been losing ground to synthetic wood components. The change in consumer preference was evident…
Veneer Splicing Machine ‘A Workhorse’
“I haven’t really had any issues with it. It’s running like a champ.” Those are the words of Joe Darter about his Veneer Services splicing machine, which he bought and…
Types of Log Debarkes: Guide to Advantages and Disadvantages
Wood processors have no shortage of options when it comes to debarking equipment. If processors deal with large volumes of wood, they have drum, ring, and roller (rotary or continuous)…
Rosserhead Debarkers: Common Problems and Uncommon Solutions
Do any of these problems seem familiar? The bark keeps wrapping in your rosserhead debarker. The debarker cannot get through the bark and down to the log. The bark plugs…
Designing And Improving the Butt Flare Reducer
We believe in continual improvement at Veneer Services. We never assume our first design is the ultimate design. And it’s why the butt flare reducers we produce today are different…
Why Veneer Glue from Veneer Services®?
Since National Casein® stopped producing its Splyset 200 glue, veneer manufacturers have been scrambling to find a splicing glue supplier. In an already limited market, their choices just became that…
Increase Yield and Decrease Cost With Our Rosserhead Debarker
The fact that so many mills have invested in scanning and optimizing is proof that yield improvement has great payback. But scanning and optimizing can't give you back what was removed at the debarker.…
Butt Flare Reducer: Best ROI on a Sawmill Machine
The decision to add a new machine to your sawmill ultimately comes down to whether it’s worth the investment. Of all the machines you can add, a butt flare reducer may…