165” Capital half round slicer. Three units available. Equipped with:

• Vacuum table
• Upgraded controls
• Water heater
• Auto-lube system
• Tilt cap
• Offset upgrade
• Knife clamps
• Ball screw carriage movement
• Updated hydraulic lead

Comes with many spare parts.

4.7m Raute press dryer. Includes:

• Six sections
• Cooling

Coe 263 8′ Lathe. Included:

• Backup roll

4′ Omeco Lathe, spindleless.

Video: https://youtu.be/PJxa0KtcOfU

8′ Omeco Lathe, spindleless. Doesn’t need special foundation.

CAD Drawing

Omeco 4.7m 4-deck roller dryer. Includes:

• 8 sections
• Cooling

Roller Dryer CAD Rendering

Fenzer 10′ Knife Grinder.

Taihei 10 ft. Knife Grinder.

9′ Uroko lathe.

Capital Half Round Slicer/Lathe with Groover. Includes:

• 154″ knife
• Capital reduced core staylog
• Groover

Marunaka SL350V with go around.

RFR Clipping Line with decks, measuring, and waste handling.

Valette Garreau staylog, 3.2m.

Schilde 2 deck dryer.

132″ Capital Lathe. Includes:

• Knife clamps update

Cremona Flitch Planer. Inquire for details.

185″ Capital slicer. One unit available. Included:

• Vacuum table
• Water heater
• Tilt cap
• Auto lead system
• Ball screws on carriage
• Servo on carriage

213″ Capital half round slicer. 3 units available. Included:

• Water heater
• Tilt cap
• Auto lube system
• Ball screws on carriage
• Servo on carriage
• Flitch pushers
• Updated hydraulic unit

150″ Capital half round slicer. 3 units available. Reduced core staylog upgrade.

125″ Capital half round slicer. With staylog. One unit available.

2.8m Raute lathe. Features:

• Dual spindles
• Small spindle 95mm

Multiple tables available. For veneer half round slicer staylogs.

5′ (60 in.) Coe 263 lathe line. Includes:

• Charger
• Dual spindles (4″ and 7″)
• Infeed deck
• Linear charger
• Hydraulics

RFR 4.3m Sine Wave Clipper. Inquire for details.

RFR 1.2m End Clipper. Inquire for details.

Babcock 4.3m press dryer. Includes:

• 6 sections
• Cooling

VG 4.3m Slicer. Inquire for details.

VG 3.4m Half Round Slicer. Inquire for details.

Valette Vertical Slicer

2.8m Ruckle Guillotine.

Capital 100 in. Drop Clipper

Capital 88 in. Drop Clipper

Capital 76 in. Drop Clipper

Capital 65 in. Drop Clipper

2.8m Fezer splicer F28 model with trimmer and stacker. Everything is in excellent condition, clean and well cared for. This package has always seen light production.

Details:

• Model: F 28 TT
• Max Veneer Length: 2.8m
• Voltage: 460v, 110A
• Year built: 2003

Includes:

• Trim
• Tape
• Stacker
• Electrical and operational manual

3.4m Ruckle FZS splicer with stacker.

2.8m Ruckle FZS splicer with stacker.

8′ Chang Tai composer with 8’×4′ stacker

8′ Chang Tai Composer. Included:

• 8×8 stacker
• Splitting disc for 4×8

3.7m Fezer GRC guillotine. Included:

• Automatic glue application

Capital 110 in. Drop Clipper

Pre-Press, 5′ x 10′.

Double trim line, 5′ x 10′.

Timesavers 36 in. Sander

Plywood Trimmer Line with Auto Feeder. 5′ x 10′.

1.2 MW Elliott turbine, ABB Generator, BAC cooling tower, controls, No boiler.

2.8 MW Elliott turbine, ABB generator, cooling tower, 600 Hp boiler, 800 HP boiler, ESP (COMPLETE)

400 HP, 150 psi, Hurst hybrid, 1994, underfeed stroker, all fans, stacks, controls, conveyors, cyclones, feedwater systems included

135 HP, 15 psi, Burnham firebox, underfeed stroker, fans, conveyors, cyclones, feedwater and controls included

250 HP, 15 psi, Kewanee firebox, underfeed stroker, fans, conveyors, cyclones, feedwater and controls included

600 HP, 150 psi, Hurst hybrid, 1999, underfeed stroker, all fans, stacks, controls, conveyors, cyclones included

Fezer drum chipper. Details:

• PC 70 in.× 70 in.
• 27.5-in. (700mm) infeed width
• 9-in. (230mm) infeed height
• Setup for 3/4-in. (18mm) chip
• 150 HP motor
• Driven top and bottom feed rolls

Fezer PC70-70 manual 2002

Multiple units available.

Wood production transformers. Multiple units available. Inquire for details.

Multiple units available. Inquire for details.

Multiple units available. Inquire for details.

Hoists from 1/2 ton to 5 tons. Inquire for details.

Inquire for details.

Inquire for details.

Inquire for details.

Used Barko log loader. Inquire for details.

Used hazmat cabinets. Inquire for details.

Various fans to 300hp. Multiple units available. Inquire for details.

Multiple units available. Inquire for details.

Inquire for details.

Forklifts from 3000 – 8000 lbs. Inquire for details.

Multiple units available. Inquire for details.

5000lb floor scale.

Rigid pipe threader, 300-A

S&L 48″ Diameter trim saw. Details:

• 50 HP HPU
• 4 blades included

Montgomery hog, 400hp.

Capital veneer hog, 30″

Tannewitz bandsaw, 36″

1.5hp Hydraulic Power Unit

3hp Hydraulic Power Unit

7.5hp Hydraulic Power Unit

10hp Hydraulic Power Unit

25hp Hydraulic Power Unit

Hydraulic power unit, 50hp.

Miller 300 welder.

Various motor controls. Inquire for details.

Bar-Type Trim Saw

Bridgeport Milling Machine

Inquire for details.